Integra Luxtec MLX Operation And Service Manual page 16

ELECTROMAGNETIC COMPATIbILITY (EMC) USER INfORMATION
Guidance and Manufacturer's Declaration – Emissions Equipment and Systems that are not Life-supporting
the MLX light source is intended for use in the electromagnetic environment specified below. the customer or user
of the MLX light source unit should ensure that it is used in such an environment.
immunity test iec 60601
test Level
conducted rF 3 Vrms from
iec 61000-4-6 150 khz to
80 Mhz
radiated rF 3 V/m
iec 61000-4-3 80 Mhz to
2.5 ghz
recommended separation Distances Between Portable and Mobile rF communications
equipment and the MLX equipment and systems that are not Life-supporting
the MLX light source is intended for use in the electromagnetic environment in which radiated disturbances
are controlled. the customer or user of the MLX light source can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile rF communications equipment and the MLX
light source as recommended below, according to the maximum output power of the communications
equipment.
150 khz to 80
Mhz
Maximum
output Power
d
. 1
=
(watts)
0.01 0.11667
0.1 0.36894
1 1.1667
10 3.6894
100 11.667
table 204
compliance
Level
V1 = 3 Vrms Portable and mobile rF communications equipment should
be separated from the MLX light source by no less than the
recommended separation distances calculated/listed below:
D
=
e1 = 3V/m
D
=
D ( =
where P is the maximum power rating in watts and D is the
recommended separation distance in meters.
Field strengths from fixed transmitters, as determined by an
electromagnetic site survey, should be less that the compliance
levels (V1 and e1).
interference may occur in the vicinity of equipment containing a
transmitter.
table 206
recommended separation Distances for the MLX (meters)
80 to 800Mhz
d . 1 1667
=
P
1667
0.11667
0.36894
1.1667
3.6894
11.667
M L X 3 0 0 w a t t X e n o n L i g h t s o u r c e
electromagnetic environment – guidance
3 ( / 5 . V ) 1 P
3 ( / 5 . E ) 1 P
80 to 800 Mhz
/ 7 E ) 1 P
800 Mhz to 2.5 ghz
800 Mhz to 2.5 ghz
P d . 2 3333 P
=
0.23333
0.73785
2.3333
7.3785
23.333
15