Related Manuals for Integra Luxtec UltraLite Pro
Summary of Contents for Integra Luxtec UltraLite Pro
- Page 1 Integra Luxtec ® ® OPERATION AND SERVICE MANUAL UltraLite® Pro Headlight Integra® Luxtec® UltraLite® Pro Headlight For use with high power surgical light sources...
-
Page 2: Table Of Contents
Integra Luxtec ® ® UltraLite® Pro Headlight Table of Contents Indications for Use ......................................2 Symbols ..........................................3 General Warnings .........................................4 Precautions ...........................................4 Assembly ..........................................5-7 Adjustments .......................................... 7 Replacement Parts ........................................8 Care and Maintenance ......................................8 Warranty ..........................................8 Return Policy .........................................8... -
Page 3: Indications For Use
CAUTION: FEDERAL (USA) LAW RESTRICTS THIS DEVICE TO SALE BY OR ON THE ORDER OF A PHYSICIAN Indications for use This fiber optic headlight system is designed to deliver illumination from a high intensity light source for surgical site illumination. The UltraLite®... -
Page 4: Symbols
Integra Luxtec ® ® UltraLite® Pro Headlight Symbols Found on a medical grade light source, other illumination related equipment, fiber optic cables and corresponding packaging. Certified by CSA Caution Consult Instructions for Use Caution: High Voltage Fuse Caution: HOT Alternating Current... -
Page 5: General Warnings
FIBER OPTIC CABLE OR HEADLIGHT ON A DRAPE WHILE • Use care not to point the headlight directly at the eye while THE LIGHT SOURCE IS OPERATING. in operation. The brilliant light output can cause severe eye discomfort. • ONLY USE INTEGRA ULTRALITE PRO CABLES WHEN USING THIS HEADLIGHT • Do not use this device for Ocular Surgery or in a procedure requiring direct illumination of the eye. • Do not place or rest a hot cable/metal end fitting or headlight on a patient or come into contact with • Do not look directly at the headlight or open end of the... -
Page 6: Assembly
Integra Luxtec ® ® UltraLite® Pro Headlight Assembly Assembly of the UltraLite Pro Headlight System ® (Fig 4b) The UltraLite Pro Headlight system consists of a ® headband, variable spot module, gown clips and a bifurcated fiber optic cable. To assemble the headlight, attach the variable spot module... - Page 7 (Fig 12) Assembly of the UltraLite Pro Headlight System ® Next open the headlight assembly fully by pulling the (Fig 7) The headlight should then be adjusted circumferentially using the ratchet knob at the rear as shown (Fig 13). The UltraLite ®...
-
Page 8: Adjustments
These instructions should help you get started with your new Luxtec equipment, quickly and easily. If you have any problems, please contact Integra LifeSciences Corporation: 800-325-8966,... -
Page 9: Replacement Parts
Pro cable in any ® sterilization solution. Integra reserves the right to make design changes on its products without liability to incorporate said change in There is a lens assembly at the light source end, which is not Integra products previously designed or sold. - Page 10 Sragh, Tullamore, County Offaly, Ireland www.integralife.com Integra, the Integra logo, Luxtec and UltraLite are registered trademarks of Integra LifeSciences Corporation or its subsidiaries in the United States and/or other countries. ©2019 Integra LifeSciences Corporation. All rights reserved. 60905990 Rev A 1430065-1...