Software Update - Ivoclar Vivadent Programat CS6 Operating Instructions Manual

2. Application
Step 2:
Conduct the data backup
Connect a USB flash drive to the furnace and press the [Execute]
button.
Use the Programat USB flash drive provided or a FAT32-formatted USB flash drive for data backup.
Step 3:
Complete the data backup
Data backup successful
Data backup failed
To return to the home screen, press either the [Home] button in the navigation bar or the HOME key on the
membrane-sealed keypad.

2.2.4.5 Software update

Software updates can be easily installed on the furnace by means of a USB flash drive. A USB flash drive, which contains a
current software file (e.g. CS6_V1.10.iv) is required for the update. The software version on the USB flash drive must be
higher than the one installed on the furnace (see Information menu).
Free software updates for Programat furnaces are available from www.ivoclarvivadent.com/downloadcenter.
Back-up your data before performing a software update.
Important information
Please note that modified Ivoclar Vivadent programs may be overwritten during a software update. Individual
programs are not affected and will not be overwritten.
A software update requires only few steps:
Step 1:
Open software update
Scroll to page 2 in the home screen and press the button
[Software update].
34