To Set The Duty Cycle - Rigol DSO-5200A User Manual

To Set the Duty Cycle

1. Press Square  DtyCyc, to set the Duty Cycle.
The Duty Cycle shown on the screen is the default value when the instrument is
powered or the set value beforehand. When changing the function, if the current
value is valid for the new waveform, it will be used sequentially.
2. Input the desired Duty Cycle.
Use the keypad or the knob to input the desired value, choose the unit, and press
the corresponding button. The Generator will change the waveform immediately.
Current Parameter:
Duty Cycle
Press View, in the Graph Mode, the waveform is shown in the following figure.
© 2008 RIGOL Technologies, Inc.
Figure 2-8
Setting the Duty Cycle
Figure 2-9
Waveform Parameters in the Graph Mode
14
RIGOL