Stand Height Setting - Dürkopp Adler 52 i Series Operating Instructions Manual

Setup
Operating Instructions 52Xi, 52Xi-75 - 00.0 - 10/2021
6.5

Stand height setting

WARNING
Risk of crushing from the moving parts!
The table top can sink under its own weight when
the screws on the stand bars are loosened.
Crushing possible.
Ensure that your hands are not jammed when
loosening the screws.
CAUTION
Risk of musculoskeletal damage from
incorrect setting!
The operator can sustain musculoskeletal
damage of failing to comply with the ergonomic
requirements.
Adjust the working height to the body height of the
person who will operate the machine.
Pic. 29: Stand height setting
(1) - Screws
The stand height is adjustable between 750 and 900 mm.
①
75