Install A Pa-5400 Series Firewall Networking Card (Nc) - PaloAlto Networks PA-5400 Series Hardware Reference Manual

PA-5400 Series Firewall Installaon
STEP 2 | Remove the MPC from the anstac bag. Push the top and boom ejector tabs towards each
other to allow the ejector levers to rotate into an open posion.
STEP 3 | Rotate the card and align it with the front of the appliance so that the Palo Alto Networks
logo is readable at the top of the card. Gently push the MPC into slot 7 unl the card reaches
the end of the slot.
STEP 4 | Push on both ejector handles unl they lock the card into place.

Install a PA-5400 Series Firewall Networking Card (NC)

STEP 1 |
Aach the provided ESD strap to your wrist and plug the other end in to the ESD port
locaon on the front of the appliance. See
port.
PA-5400 Series Next-Gen Firewall Hardware Reference
PA-5450 Front Panel
44
for the locaon of the ESD
2021 Palo Alto Networks, Inc.
©