PaloAlto Networks PA-5400 Series Hardware Reference Manual page 59

PA-5400 Series Firewall Installaon
admin@PA-5450> request chassis power-on slot <slot-number> target ha-
pair
For example, to enable NCs installed in slot 2 of both appliances, run the following command:
admin@PA-5450> request chassis power-on slot s2 target ha-pair
For informaon on installing NCs, see
PA-5400 Series Next-Gen Firewall Hardware Reference
Install a PA-5400 Series Firewall Networking Card
59
(NC).
2021 Palo Alto Networks, Inc.
©