Install The Pa-7000 Series Firewall; Tamper Proof Statement - PaloAlto Networks PA-7000 Series Hardware Reference Manual

Chapter 3

Install the PA-7000 Series Firewall

The PA-7000 Series firewalls are designed for installation in a standard 19-inch rack in a mid-mount or
front-mount position. Before you unpack the hardware, ensure that you read the "Tamper Proof
Statement" on page 39 and ensure that you read the safety information in "Before You Begin" on
page 40.
•
"Tamper Proof Statement" on page 39
•
"Before You Begin" on page 40
•
"Rack Installation" on page 41
•
"Install the Mandatory Front Slot Cards" on page 52
•
"Connect Power to a PA-7000 Series Firewall" on page 68
•
"Connect Cables to a PA-7000 Series Firewall" on page 82

Tamper Proof Statement

To ensure that products purchased from Palo Alto Networks have not been tampered with
during shipping, verify the following upon receipt of each product:
•
The tracking number provided to you electronically when ordering the product should
match the tracking number that is physically labeled on the box or crate.
•
The integrity of the tamper-proof tape used to seal the box or crate should not be
compromised.
Note: Being a modular system, please note that the PA-7000 Series firewalls do
not have a warranty seal on the chassis.
Palo Alto Networks
Tamper Proof Statement
Install the PA-7000 Series Firewall • 39