Amana AVXC20 Series Service Instructions Manual page 67

SETTING THE MODE DISPLAY
SETTINGS MODE 2
< SCREEN FOUR >
Setting Mode 2 allows the user to
change system settings. See table
in back of this section.
< SCREEN THREE >
< SCREEN FOUR >
Press
RECALL
< SCREEN ZERO >
Hold RECALL and TEST.
Press RECALL
to increase the number.
Press RECALL.
Press RECALL.
Press TEST
to change setting.
Press RECALL.
Press TEST to complete setting and return to setting mode.
OFF
ON
Blink interval:
0.4 sec. On - 0.4 sec. Off
Press LEARN.
< Changing setting display >
Press
RECALL.
Press RECALL.
Press RECALL.
67