Amana AVXC20 Series Service Instructions Manual page 66

SETTING THE MODE DISPLAY
SETTINGS MODE 1 NAVIGATION
< SCREEN THREE >
Setting Mode 1 allows the user to adjust
system settings as shown in the tables
at the end of this section.
< SCREEN THREE >
Press
RECALL.
66
< SCREEN TWO >
Hold RECALL.
Press RECALL
to increase the value.
Press RECALL.
Press RECALL.
Press TEST
to change setting.
Press RECALL.
Press TEST to complete setting and return to setting mode.
< SCREEN ZERO >
Press LEARN.
OFF
ON
Blink interval:
0.4 sec. On - 0.4 sec. Off