Figure 2-1, Approved Mounting Orientations; Figure 2-2, Mm Series Inverter Dimensions - Sensata MAGNUM ENERGY MM Series Owner's Manual

Installation
If this unit is used in a mobile application, you may want to place fl exible
washers or bushings between the mounting surface and the inverter's
mounting fl anges to reduce vibration.
Refer to Figure 2-2 for unit dimensions. After the inverter has been properly
mounted, proceed to the DC Wiring section.
Wall Mounted (right-side up) Wall Mounted (up-side down)
Shelf Mounted
(right-side up)
Shelf Mounted
(up-side down)

Figure 2-1, Approved Mounting Orientations

~4¾"
~6¾" (17.1 cm)
(12.1 cm)
~7½" (19.1 cm)
~8½" (21.6 cm)

Figure 2-2, MM Series Inverter Dimensions

© 2016 Sensata Technologies
7