Table of Contents
Advertisement
Introduction
1.
Inverter Status Indicator – this green light emitting diode (LED)
illuminates to provide information on the inverter's operation.
2.
Power ON/OFF Switch – momentary pushbutton switch that turns the
inverter on or off.
3.
Negative DC Terminal (black) – the inverter's connection to the
negative terminal on the 12 VDC battery bank.
4.
Positive DC Terminal (red) – the inverter's connection to the positive
terminal on the 12 VDC battery bank.
5.
Output Circuit Breaker (AC Out) – this circuit breaker provides another
layer of overload protection. This is not a branch circuit-rated breaker.
Separate AC output breakers are required on the output.
6.
Input Circuit Breaker (AC In) – this circuit breaker protects the unit's
internal wiring and pass-thru relay.
7.
a) AC Wiring Compartment – provides access for all AC input and output
hardwiring connections on the inverter (MM612 & MM1212 models only).
b) GFCI Outlet – a Ground Fault Circuit Interrupter (GFCI) outlet with
test and reset capability (MM1212-G model only).
8.
Mounting Flanges (x4) – used to secure the inverter to a shelf/wall.
Figure 1-2, Top Side Features
9.
Warning and Information Label – provides pertinent information for
safely using the inverter.
10. REMOTE Port Connection – a RJ11 connector that allows an optional
remote control to be connected.
11. ACCESSORY Port Connection – a RJ11 connector (only available for
models with the battery charger) to allow the Battery Temperature Sensor
(BTS) or various MM accessories (e.g., MM-DCLD) to be connected. The
BTS provides information that enables the multi-stage PFC battery charger
to "fi ne tune" the battery charge voltages.
12. Intake Vent – ventilation openings to pull in air to help keep the inverter
cool for peak performance.
13. Exhaust Vent – ventilation openings that allow heated air to be removed
by the internal cooling fan.
14. Model/Serial Number Label – includes model/serial number and
provides specifi cations and information on the inverter and charger. See
the Specifi cations on page 28 for more information.
3
= MM1212-G only
7a
7b
8
2
1
6
© 2016 Sensata Technologies
3
4
5
Advertisement
Table of Contents
