Sensata MAGNUM ENERGY MM Series Owner's Manual page 3

Conventions Used in this Manual
Safety Symbols
To reduce the risk of electrical shock, fi re, or other safety hazard, the following
safety symbols have been placed throughout this manual to indicate dangerous
and important safety instructions.
WARNING: This symbol indicates that failure to take a specifi ed
action could result in physical harm to the user.
CAUTION: This symbol indicates that failure to take a specifi ed
action could result in damage to the equipment.
Info: This symbol indicates information that emphasizes or
supplements important points of the main text.
IMPORTANT PRODUCT SAFETY INSTRUCTIONS
This manual contains important safety instructions that must be followed
during the installation and operation of this product. Read all instructions
and safety information in this manual before installing or using this product.
• All electrical work must be performed in accordance with local, state,
and federal electrical codes.
• This product is designed for indoor/compartment installation. It must not
be exposed to rain, snow, moisture, or liquids of any type.
• Use insulated tools to reduce the chance of electrical shock or accidental
short circuits.
• Remove all jewelry such as rings, watches, bracelets, etc., when installing
or performing maintenance on the inverter.
• Always disconnect the batteries or energy source prior to installing or
performing maintenance on the inverter. Live power may be present at
more than one point since an inverter utilizes both batteries and AC.
Turning off the inverter may not reduce this risk. As long as AC power
is connected, it will pass through the inverter regardless of the ON/OFF
power switch setting.
• Always verify proper wiring prior to starting the inverter.
• Do not operate the inverter if it has been damaged.
• Do not dismantle the inverter; there are no user-serviceable parts
contained in this product. Attempting to service the unit yourself could
cause electrical shock. Internal capacitors remain charged after all power
is disconnected.
• No AC or DC disconnects are provided as an integral part of this inverter.
Both AC and DC disconnects must be provided as part of the system
installation.
• No overcurrent protection for the battery supply is provided as an integral
part of this inverter. Overcurrent protection of the battery cables must
be provided as part of the system installation.
• No overcurrent protection for the AC output wiring is provided as an
integral part of this inverter. Overcurrent protection of the AC output
wiring must be provided as part of the system installation.
ii
© 2016 Sensata Technologies