Battery Temperature Sensor (Mm1212 & Mm1212-G); Figure 1-3, Front And Back Side Features; Figure 1-4, Left Side Features; Figure 1-5, Battery Temperature Sensor - Sensata MAGNUM ENERGY MM Series Owner's Manual

Front Side

Figure 1-3, Front and Back Side Features

15. AC Output Connection – AC knockout (output) for hardwiring (MM612
& MM1212 models only). Note: MM1212-G models include an attached
3 ft. standard plug-in power cord.
16. AC Input Connection
& MM1212 models only). Note: MM1212-G models have a GFCI outlet.
17. DC Ground Terminal – this connection is used to tie the exposed chassis
of the inverter to the DC grounding system. This terminal accepts CU/AL
conductors from #14 AWG to #6 AWG (2.1 mm
= Power cord with
MM1212-G only

Figure 1-4, Left Side Features

1.6 Battery Temperature Sensor (MM1212 & MM1212-G)
A plug-in external Battery Temperature Sensor (BTS) is provided for units with
the battery charger feature. When installed, the BTS automatically adjusts
the battery charger's BULK, ABSORB, and FLOAT voltage set-points based on
temperature for better charging performance and longer battery life. If the
temperature sensor is NOT installed and the batteries are subjected to large
temperature changes, battery life may be shortened.

Figure 1-5, Battery Temperature Sensor

© 2016 Sensata Technologies
9
10
11
12
– AC knockout (input) for hardwiring (MM612
15
(5.1 cm)
FRONT VIEW
Cable
SIDE VIEW
Introduction
Back Side
to 13.3 mm
2 2
16
~2" ~1"
(2.6 cm)
~¾"
(~2 cm)
0.375" diameter
(~1 cm)
~½"
(~1.3 cm)
13
14
).
17
4