Evaluation Board - Quectel EM05-G Hardware Design

NOTES
The typical supply voltage of VCC is 3.3 V.
1.
Keep all NC and unused pins open.
2.
EM05-G does not support I2C interface.
3.
1) Pin function can be selected according to the actual situation.
4.
2) If this function is required, please contact Quectel for more details.
5.

2.6. Evaluation Board

To help you develop applications conveniently with EM05-G, Quectel supplies an evaluation board (M.2
EVB), two USB type-C cables, antennas and other peripherals to control or test the module. For more
details, see document [2].
EM05-G_Hardware_Design
LTE Standard Module Series
EM05-G Hardware Design
22 / 69