Johnson Controls SABROE Unisab III Control Engineering Manual page 270

Find the file you want to upload using the Open button and then press Upload.
The following types of files can be uploaded:
• ColdfireHMI.strip - (program application, not visible in the file overview)
• ResourceBundles – (language file library)
o RessourceBundle - (English language file)
o RessourceBundle_xx - (language file for xx language)
• ArialUnicode_8p.pbf - (Unicode language support file)
• ArialUnicodeBold_8p.pbf - (Unicode language support file)
• UniqueConfig.xml - (configuration file, version info, IP setup)
• HMIsettings.xml - (configuration file, favourites setup)
• Configuration.xml - (configuration file, configuration setup )
• AnalogInput.xml - (configuration file, analogue limits setup)
• PIDSettings.xml - (configuration file, PID parameter setup)
• Timers.xml - (configuration file, timer setup)
• R000Table.xml - (configuration file, refrigerant R000 setup)
• Modbus.xml - (Modbus TCP address look up file)
• EmailService.xml – (configuration file, remote monitor server and user e-mail address
setup)
The following files are for internal use only, do not try to open or modify these files as it may
crash the system.
• ShutdownLog.xml - (for internal use only, do not modify)
• TimeLog.xml - (for internal use only, do not modify)
• Vfd.dat - (for internal use only, do not modify)
• Watchdog.log - (for internal use only, do not modify)
• Flashload.sem - (for internal use only, do not modify)
• trend.txt – (trend log for internal use, do not modify)
• trend.tmp - (trend log for internal use, do not modify)
Make sure to upload language files of the type ResourceBundles_xx into the sub-directory
named ResourceBundles, i.e. you must change the directory (by clicking on ResourceBundles)
before uploading.
Unisab III (boot) and communication set-up
Engineering manual - Unisab III 1.10
268/319
001930 en 2014.09