2 POTS, 2 GigE ONT Installation and Maintenance Practice
Wire Routes and Pre-Terminating the Outer Enclosure
Figure 13
shows the Outer Enclosure with all of the connections pre-cut to proper length, pre-
terminated with the appropriate connectors, and inserted into their appropriate place holders.
The following sections describe these pre-termination procedures which, when completed,
enables the ONT Inner Module to be installed at a later time. However, these pre-termination
steps are unnecessary if the Inner Module and Outer Enclosure are to be installed at the same
time.
Figure 13. Pre-Terminated Outer Enclosure
24
61187602G2-5A