Installation; Shipping Contents - ADTRAN Total Access 300 Installation And Maintenance Practice

2 POTS, 2 GigE ONT Installation and Maintenance Practice

INSTALLATION

Electrostatic Discharge (ESD) can damage electronic components.
When handling modules, wear an antistatic discharge wrist strap
to prevent damage to electronic components. Place modules in
antistatic packing material when transporting or storing. When
working on modules, always place them on an approved antistatic
mat that is electrically grounded.
After unpacking the ONT, inspect it for damage. Before planning the installation of the ONT,
the technician should do the following to verify component integrity.
1. Unpack both the ONT and power supply (packed separately) to ensure the units are
visibly intact and are not missing any components.
2. Examine the ONT enclosure, fiber management guide, associated IDC terminals, weather
resistant grommets, fiber connector, telephone and Ethernet ports for usability.
3. Examine the power supply to ensure that the UPS, battery and power cord are present
and sound.
If damage has occurred, file a claim with the carrier then contact ADTRAN Customer Service.
Refer to "Appendix A, Warranty"
container for returning the ONT for repair or for verification of shipping damage.

Shipping Contents

The contents include the following items:
• 2 POTS, 2 GigE ONT
• Total Access 300 2 POTS, 2 GigE ONT Job Aid (P/N 61187602G2-22)
• Total Access 300 2 POTS, 2 GigE ONT Compliance Notice (P/N 61187602G2-17)
18
CAUTION
C A U T I O N !
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY.
HANDLING PRECAUTIONS REQUIRED.
for further information. If possible, keep the original shipping
61187602G2-5A