Safety Considerations, Explicit Definitions - Acom 700S User Manual

Safety Considerations, Explicit Definitions

1.5.
The ACOM 700S linear amplifier is a Safety Class I unit regarding protection against electric shock. The third
grounding lead of its mains cord (which is colored yellow with two green stripes) and the ground stud on
the rear panel of the amplifier (marked GND, see
the station's grounding system for safe operation.
The amplifier is designed to meet international safety standards and complies with CE safety and
electromagnetic compatibility requirements, as well as FCC regulations.
This User's Manual contains information, warnings (signal words Danger, Warning, Caution and Notice) and
instructions, related to hazards, that should be followed by the user in order to ensure safe operation and
to keep the amplifier in a safe working condition at all times.
The EXPLICIT DEFINITIONS described below apply to this User's Manual:
These notes call attention to a procedure or instructions which, if not correctly
performed, will result in serious personal injuries and even death.
These notes call attention to a procedure or instructions which, if not correctly
performed, could result in serious personal injuries and even death.
These notes call attention to a procedure or instructions which, if not correctly
performed, could result in minor or moderate personal injuries.
These notes call attention to a procedure or instructions which, if not correctly
performed, could result in property damage or equipment damage not exclusively to
the amplifier but also to connected equipment.
Page 10 of 52 | S e c t i o n GENERAL INFORMATION
User's Manual | ACOM 700S | 1.8-54 MHz Linear Amplifier
Figure 2-1 Rear panel - Connections
DANGER
WARNING
CAUTION
NOTICE
) must be connected to
May 2021