Automatic Mode; Manual Drive Mode - Maytronics Dolphin M700 User Instructions

8.2 Programmable Mode
The remote-control-unit offers two Programmable operation modes:
• Delayed Operation
• Weekly Scheduling
In Delayed Operation mode, you can set the Pool Cleaner to clean the pool later, by pressing START
LATER.
The power supply will start blinking green.
After one hour, the Pool Cleaner will start working.
If you wish to cancel the START LATER program, press again on the START LATER icon.
When the power supply stops blinking, the program is canceled.
In the Weekly Scheduling mode, you can set your own cleaning program.
You can choose if you want to clean your pool every two days or every three days.
• To clean your pool every 2 days, press
• To clean your pool every 3 days, press
• The scheduling program is valid for one week only.

8.3 Manual Drive Mode

You can use the Manual Drive mode to control how your Dolphin Pool Cleaner navigates around the pool.
• If the robot is ON – Turn on the remote, press the mode selector, and use the direction control
arrows to control the movement of the robot around the pool.
• If the robot is OFF – Turn on the remote and wait for 60 seconds until the self-test is completed.
Press the mode selector and use the direction control arrows to control the movement of the robot
around the pool.
NOTE: If the signal bar is blinking
due to one of the following reasons.
What's wrong
The power supply isn't working
The remote-control is not in range
The remote-control isn't paired with your robot
In case of difficulties operating the remote-control unit, try to repeat the above steps or contact our
Customer Care team.
* see details in the end of this document.
14
or you have lost connection with the power supply, it could be
What to do
Make sure the power supply is plugged in
Move closer to your power supply
Make sure the remote control is OFF.
Attach the remote-control unit to the power
supply.
Press simultaneously on both right and left
direction control arrows until you hear two
beeps, and the power supply shows a steady
blue
connectivity LED
M700 Robotic Pool Cleaner
User Instructions
|