Using The Robotic Pool Cleaner; Setup - Maytronics Dolphin M700 User Instructions

5. USING THE ROBOTIC POOL CLEANER

5.1 Setup

Before using the Robotic Pool Cleaner for the first time, perform the following steps:
5.1.1
Position the power supply
at approximately the middle of the
long side of the pool, at least at
a distance of 3.5m/12ft. from the
pool's edge.
2
5.1.3
Attach the floating cable to the power supply:
Insert the cable with the notch on the connector (1),
lined up with the groove in the socket on the power
supply, and turn clockwise (2).
cm in
minimum
cm in
minimum
5.1.2
Unwind the cable and stretch it out completely so that it
has no kinks.
1
5