Maytronics Dolphin M700 User Instructions page 22

Action
For iOS users.
Power supply replacement for new Wi-Fi®
connection.
Motor unit replacement for unit that was
not reported to the support system by the
technician.
If none of these solutions do not solve your problem, contact Maytronics Customer Care:
Australia, NZ
1300 693 657
infoau@maytronics.com
For full information and additional troubleshooting please visit us at:
Trademark Attributions
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc.
and any use of such marks by Maytronics Ltd. is under license. Other trademarks and trade
names are those of their respective owners.
M700 Robotic Pool Cleaner
What To Do
New power supply for a robot connected through Wi-Fi®
1. Turn on the power supply while it is connected to the robot and let it work for
several seconds (it will sync with the robot).
2. Login to the app. A connection error message will appear.
3. Go to "settings", on the top bar → click on "robot details" → "disconnect from the
robot" →"proceed" → "search for nearby robots" → your robot" → click on "change
connectivity" → "set Wi-Fi® connectivity" → "go online".
4. Enter your Wi-Fi® name and password.
1. Disconnect the power supply from the wall socket before use.
2. After replacing the motor unit (MU), reconnect the power supply to the wall socket
and turn on the power supply. Let the robot work for several seconds.
3. Open the MyDolphin™ Plus app. You will see a connection error.
4. Go to "settings" in the top bar → "robot details" → "disconnect from the robot"
→"Proceed" → "search for nearby robots" find and select the "new Dolphin MU s/n" →
a "is this your robot?" message will appear. After checking the s/n number, press "Yes
this is my robot" → The MU will link to robot and the app → home screen.
If you do not recognize the serial number, press to add the robot s/n manually or scan
the QR Code.
User Instructions
|
www.maytronics.com.au
21