Assemble the impeller compartment according to the next steps:
6.3.5
6.4 Periodic general maintenance - Recommended at least once a week
•
When the cable is wet, spread it flat and straight in the yard, and allow it to dry for at least five
hours to avoid twisting of the cable.
•
Wash the Robotic Pool Cleaner with fresh water, to reduce damage caused by the chemicals in the
pool water.
7. OFF-SEASON STORAGE
If the Robotic Pool Cleaner will not be in use for an extended period of time, perform the following
storage steps:
•
Make sure that no water is left in the Robotic Pool Cleaner.
•
Thoroughly clean the filter basket and panels and insert them back in place.
•
Roll up the cable so that it has no kinks.
•
Store the Robotic Pool Cleaner in a protected area out of direct sun/rain/frost, at a temperature
of between 5°-45°C / 41°-113°F.
12
6.3.6
M700 Robotic Pool Cleaner
User Instructions
|