Lifting With Lifting Equipment; Lifting With A Forklift - Optimum OPTI turn TU 3008G Operating Manual

2
4
Img.3-1: Load suspension point
3.2.2

Lifting with lifting equipment


Fasten the load suspension gear as presented in

Make sure that you distribute the loads evenly so that the lathe cannot turn over while
lifting.

Make sure that no add-on pieces or varnished parts are damaged due to the load
suspension.
3.2.3

Lifting with a forklift

It is recommended that the lathe is transported on the lower portion of the packing crate.
Disassemble the lateral parts of the packing crate.
Transporting with a forklift:

Disassemble the splash board on the lathe.

Lift the lathe with a forklift at the rear side of the machine bed.
EN TU3008G
20
3
5

Img.3-1: Load suspension point
Translation of original instruction Version 1.1.6 - 2021-9-17