Product Identification; Nameplate; Manufacturer Address; Storage And Transport - Endress+Hauser Liquiphant FTL64 Operating Instructions Manual

Liquiphant FTL64
Endress+Hauser
4.2

Product identification

The measuring device can be identified in the following ways:
• Nameplate data
• Extended order code with breakdown of the device features on the delivery note
• Enter serial number from nameplates in W@M Device Viewer
(www.endress.com/deviceviewer): All of the information on the measuring device is
displayed along with an overview of the scope of technical documentation provided.
• Enter the serial number on the nameplate into the Endress+Hauser Operations App or
use the Endress+Hauser Operations App to scan the 2-D matrix code (QR Code) on the

nameplate

4.2.1 Nameplate
Order code:
1 Ext. ord. cd.:
Pmax:
0.83 W PNP
2
L:
Dev.Rev.:
FW:
3
4
 2 Nameplate specifications
1 Trademark (Endress+Hauser)
2 Trade name (Device name)
3 Manufacturer' s address (Certificate holder)
4 Production location (Assembly plant)
5 Order number, extended order code, serial number
6 Technical data, reference to technical documentation
7 Approval-specific information
8 DataMatrix code (information about the device)
4.2.2

Manufacturer address

Endress+Hauser SE+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
Place of manufacture: See nameplate.
4.3

Storage and transport

4.3.1

Storage conditions

Use original packaging.
Storage temperature
–40 to +80 °C (–40 to +176 °F)
Optional: –50 °C (–58 °F), –60 °C (–76 °F)
4.3.2

Transporting the device

• Transport the device to the measuring point in the original packaging
• Hold the device by the housing, temperature spacer, flange or extension pipe
• Do not bend, shorten or extend the tuning fork
Incoming acceptance and product identification
5 Ser. no.: 5
6
7
8
7
A0038187
9