Seal The Gateway; Figure 16: Cellular Gateway Battery Switch; Figure 17: Local Gateway Battery Switch; Figure 18: Battery Detail - Geokon GeoNet 8800 Series Instruction Manual

14 | NETWORK INSTALLATION | GEOKON
Power Source
Mains or solar with external battery
Solar without external battery

TABLE 6: Cellular Gateway Battery Switch Options

FIGURE 16: Cellular Gateway Battery Switch

FIGURE 17: Local Gateway Battery Switch

■
Local Gateway 880X-XX-SUP-232, 880X-XX-SUP-USB
Move the battery select switch to either the
depending on the type of battery being used.
Align the positive (+) side of the batteries with the + indicator in the battery
holder. Push the batteries straight down into the holder.

FIGURE 18: Battery Detail

3.2.3 SEAL THE GATEWAY

1. Place the supplied desiccant packs inside the enclosure.
2. Ensure the cover gasket and the mating ridge on the enclosure are clean,
and that the gasket is properly seated inside the groove on the cover. Place
the cover on the unit.
Geographic Zone
Temperate Sub Polar
BATTERY
or
ALKALINE LITHIUM
6:
9-24V
N/A
16:
17:
position
18: