28 | MODEL 8800-2-4B ADD-ON MODULE | GEOKON
6.
Update the IP Address, Netmask, Gateway, and DNS Server 1 fields to
match your network.
Note: Do not make any other changes to the settings because it may hinder
proper communications with the gateway.
FIGURE 35: Update Fields
7.
Click OK.
8.
Use the ON/OFF switch to restart the module.
9.
Connect the add-on Module to the gateway.
10. Enter the new IP address followed by :4001 in the Network Address field in
Agent software.
FIGURE 36: Enter the IP address followed by :4001
For more information on using Agent software, please refer to the Agent
Software Program instruction manual, available at https://www.geokon.com.
35:
36: