2.3 SINGLE-CHANNEL NODE
A single-channel node will read one
vibrating wire gauge, either via 10-
GEOKON
pin cable or via a cable with stripped conductor wires, depending on model.
Though designed to send data wirelessly to a mesh supervisor, this model also
features a USB connector, for transferring data using a USB cable to a PC
running Agent software.
2.3.1 10-PIN CONNECTOR (890X-XX-01C-10P)
For use with gauges with 10-pin cable connectors.
2.3.2 GLAND SEAL (890X-XX-01C-CBL)
For use with gauge cables that have stripped conductor wires. The gauge cable
passes through an external cable gland and is wired into the terminal block.
3:
FIGURE 3: 10-Pin Single-Channel Node (left) and Gland-Seal Single-Channel Node
(right)
2.4 ADDRESSABLE SENSOR NODES
Addressable sensor nodes will read up to eight
vibrating wire gauges,
GEOKON
depending on model, via cables with stripped conductor wires. The cables pass
through external cable glands and are wired into the terminal blocks.
Addressable sensor nodes function in the same manner as other nodes.
Though designed to send data wirelessly to a supervisor, these models also
feature a USB connector for transferring data using a USB cable to a PC running
Agent software, just as with single-channel nodes.
4 | NETWORK COMPONENTS | GEOKON