Figure 28: Enter The Serial Number; Figure 29: Activate Cellular Service; Figure 30: Enter Sensor Serial Numbers - Geokon GeoNet 8800 Series Instruction Manual

9. Click Devices, then enter the serial number of the Cellular Gateway.

FIGURE 28: Enter the Serial Number

10. Click Register Device.
11. Click the button next to Activate Cellular Service to activate the Cellular
Gateway.

FIGURE 29: Activate Cellular Service

12. Add logger(s) to the gateway by clicking the + sign next to the Cellular
Gateway name. Populate the fields that display.
13. Add sensors to the logger(s) by clicking the + sign next to a logger, then
enter the serial number(s) of the sensor(s) attached to the logger, one per
channel.

FIGURE 30: Enter Sensor Serial Numbers

MODEL 8800 SERIES GEONET WIRELESS DATA HOSTING SYSTEM | NETWORK INSTALLATION | 21
28:
29:
30: