Related Manuals for Wren Kitchens Vogue WALL UNIT 672 Tall L Corner
Summary of Contents for Wren Kitchens Vogue WALL UNIT 672 Tall L Corner
- Page 1 WALL UNIT 672 Tall L Corner Assembly Guide For Internal Use: FI.WR.INS.049_WKIN00134_WALL900_672_LCnr_Tall.Rev6...
- Page 2 WALL UNIT 672 Tall L Corner Assembly Guide BEFORE YOU START INSTALLATION SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Panel D Panel A Panel S Panel B Panel C Loose Shelf Loose Shelf Frontal Corner Post...
- Page 3 Step 1. Step 2. Seat dowel (F) Seat cam dowel (G) into into holes in holes in both end panels (B) Seat (G) cam dowel both end panels (B) as shown. into hole as as shown. shown. Step 3. Attach panels x2 (C) to panel (B), using cam dowels (G) (in blue), and also using dowels (F) (in orange) in positions as shown.
- Page 4 WALL UNIT 672 Tall L Corner Assembly Guide Step 5. Seat dowel (F) into holes in Seat (G) both panels (B) Step 6. cam dowel as shown. into hole as Seat expanding shown. cam dowel (G) into holes in both end panels (B) as shown.
- Page 5 Step 9. Seat dowel (F) into holes Seat (W) in both panels (D) as cam dowel into hole as shown. shown. Step 10. Seat cam dowel (W) into holes in panel (D) as shown. Step 11. Attach panels x 2 (D) to panels (C) using cam dowels (W) (in blue) and also using dowels (F) (in...
- Page 6 WALL UNIT 672 Tall L Corner Assembly Guide Step 13. Slide back panel (S) into groove of panels (C). Step 14. Slide back panel (A) into groove of side panel (B) while also allowing panel (S) slide into the groove of panel (A).
- Page 7 Screws for attaching to walls are not provided as these vary depending on materials, thicknessandconstruction.Ensureappropriatefixingsforwallconstructionareused. Care to be taken. Hanging procedure is necessary for a safe installation. Detail A Detail A Detail A Step a Step b Step c Insert hanging Rotate locking Secure with provided bracket into pre-drilled holes...
- Page 8 WALL UNIT 672 Tall L Corner Assembly Guide Screws for attaching to walls are not provided as these vary depending on materials, thicknessandconstruction.Ensureappropriatefixingsforwallconstructionareused. Step 20. Measure appropriately and attach the 3 x hanging bracket plates onto the wall screwing through the provided holes into your wall.
- Page 9 Step 24. Aligncornerposttofrontal.Equallyspace2xfixing plates (U) to the back of frontal & corner post. Ensure a 4mm gap is maintained between frontal & post once fixedtogether.Screwinplaceusing4x15mmscrews(L) perfixingplate(U). Step 25. Insert hinge in top & bottom holes as shown below. Step 26. Secure hinges by tightening 2 x screws with hinge...
- Page 10 WALL UNIT 672 Tall L Corner Assembly Guide Page 9...
- Page 11 For Internal Use: FI.WR.INS.049_WKIN00134_WALL900_672_LCnr_Tall.Rev6 Page 10...
Need help?
Do you have a question about the Vogue WALL UNIT 672 Tall L Corner and is the answer not in the manual?
Questions and answers