Subscribe to Our Youtube Channel
Related Manuals for Wren Kitchens Vogue WALL UNIT 672 L Corner
Summary of Contents for Wren Kitchens Vogue WALL UNIT 672 L Corner
- Page 1 WALL UNIT 672 L Corner Assembly Guide For Internal Use: FI.WR.INS.038_WKIN00128_WALL720_672_LCnr.Rev6...
-
Page 2: Before You Start
WALL UNIT 672 L Corner Assembly Guide BEFORE YOU START INSTALLATION SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Panel D Panel A Panel S Panel B Panel C Loose Shelf Loose Shelf Frontal Corner Post x2 Fixed Shelf... - Page 3 Step 1. Step 2. Seat dowel (F) Seat cam dowel (G) into into holes in holes in both end panels (B) Seat (G) cam dowel both end panels (B) as shown. into hole as as shown. shown. Step 3. Attach panels x2 (C) to panel (B), using cam dowels (G) (in blue),and also using dowels (F) (in orange) in...
- Page 4 WALL UNIT 672 L Corner Assembly Guide Step 5. Seat dowel (F) into holes in Seat (G) both panels (B) Step 6. Cam Dowel as shown. into hole as Seat expanding shown. cam dowel (G) into holes in both end panels (B) as shown.
- Page 5 Step 9. Seat dowel (F) into holes Seat (W) in both panels (D) as Cam Dowel into hole as shown. shown. Step 10. Seat cam dowel (W) into holes in panel (D) as shown. Step 11. Attach panels x 2 (D) to panels (C) using cam dowels (W) (in blue) and also using dowels (F) (in orange) in positions as shown.
- Page 6 WALL UNIT 672 L Corner Assembly Guide Step 13. Slide back panel (S) into groove of panels (C). Step 14. Slide back panel (A) into groove of side panel (B) while also allowing panel (S) slide into the groove of panel (A). Step 15.
- Page 7 Screws for attaching to walls are not provided as these vary depending on materials, thickness and construction. Ensure appropriate fixings for wall construction are used. Care to be taken. Hanging procedure is necessary for a safe installation. Detail A Detail A Detail A Step a Step b...
- Page 8 WALL UNIT 672 L Corner Assembly Guide Screws for attaching to walls are not provided as these vary depending on materials, thickness and construction. Ensure appropriate fixings for wall construction are used. Step 20. Measure appropriately and attach the 3 x hanging bracket plates onto the wall screwing through the provided holes into your wall.
- Page 9 Step 24. Align corner post to frontal. Equally space 2 x fixing plates (U) to the back of frontal & corner post. Ensure a 4 mm gap is maintained between frontal & post once fixed together. Screw in place using 4 x 15mm screws (L) per fixing plate (U).
- Page 10 WALL UNIT 672 L Corner Assembly Guide Page 9...
- Page 11 For Internal Use: FI.WR.INS.038_WKIN00128_WALL720_672_LCnr.Rev6 Page 10...
Need help?
Do you have a question about the Vogue WALL UNIT 672 L Corner and is the answer not in the manual?
Questions and answers