Changing The Hydraulic Clutch Fluid - Husqvarna TE 250i 2022 Owner's Manual

Hide thumbs Also See for TE 250i 2022:
Table of Contents

Advertisement

12.43

Changing the hydraulic clutch fluid

Warning
Skin irritation Brake fluid causes skin irritation.
Keep brake fluid out of the reach of children.
Wear suitable protective clothing and safety glasses.
Do not allow brake fluid to come into contact with the skin, the eyes or clothing.
Consult a doctor immediately if brake fluid has been swallowed.
Rinse the affected area with plenty of water in the event of contact with the skin.
Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact
with the eyes.
If brake fluid spills on to your clothing, change the clothing.
Note
Environmental hazard Hazardous substances cause environmental damage.
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and clutch lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
SERVICE WORK ON THE CHASSIS 12
Move the clutch fluid reservoir mounted on the handlebar to a
horizontal position.
Remove screws
Take off cover
S04454-10
Fill bleeding syringe
Syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
On the slave cylinder, remove the protection cap and bleeder
5
screw
and mount bleeding syringe
H03714-10
1
.
2
3
with membrane
.
4
with the appropriate hydraulic fluid.
p. 156)
4
.
85

Advertisement

Table of Contents
loading

Table of Contents