Programming Ambient Air Pressure; Checking The Basic Position Of The Shift Lever - Husqvarna TE 250i 2022 Owner's Manual

Hide thumbs Also See for TE 250i 2022:
Table of Contents

Advertisement

17.5

Programming ambient air pressure

Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and
death.
Always make sure there is sufficient ventilation when running the engine.
Use effective exhaust extraction when starting or running the engine in an enclosed space.
Info
If the vehicle is ridden with the engine running at various heights above sea level, the ambient pressure
is programmed on an ongoing basis.
If the vehicle is transported over great height differences, the ambient pressure must be reprogrammed.
17.6

Checking the basic position of the shift lever

Info
When driving, the shift lever must not touch the rider's boot when in the basic position.
When the shift lever keeps touching the boot, the transmission will be subject to an excessive load.
Info
Turn clockwise to decrease the idle speed.
Turn counterclockwise to increase the idle speed.
Make the setting in small steps.
An incorrect idle speed can have a negative impact on
overall engine running.
Start up the vehicle at a new height above sea level and
switch off the engine again.
Wait for at least five seconds.
Start the vehicle again and check the response of the vehicle.
»
If the response has not improved:
Repeat the procedure.
H02349-01
Sit on the vehicle in the riding position and determine
A
distance
shift lever.
Distance between shift lever
and upper edge of boot
»
If the distance does not meet specifications:
Adjust the basic position of the shift lever.
(
p. 128)
400692-10
TUNING THE ENGINE 17
between the upper edge of your boot and the
10 ... 20 mm (0.39 ...
0.79 in)
127

Advertisement

Table of Contents
loading

Table of Contents