Table of Contents
Advertisement
6 CONTROLS
6.18
6.19
6.20
22
Opening 2-stroke oil tank cap
V01647-10
Closing 2-stroke oil tank cap
V01648-10
Cold start button
S03529-10
–
1
Fold loop
upward.
–
Turn the 2-stroke oil tank cap counterclockwise and pull it
up.
–
Put the 2-stroke oil tank cap on and turn it clockwise.
–
1
Fold loop
down.
The 2-stroke oil tank cap engages.
1
The cold start button
is fitted on the side of the throttle valve
body.
If the engine is cold and the ambient temperature is low, the
electronic fuel injection system extends the injection time. To
help the engine burn the increased fuel quantity, it must be sup-
plied with additional oxygen by pulling the cold start button.
Info
If the engine is warm, the cold start button must be deac-
tivated.
Possible states
The cold start button is activated – The cold start button is
•
pulled out all the way and turned by a ¼ turn.
The cold start button is deactivated – A further ¼ turn
•
returns the cold start button back to the basic position.
Advertisement
Table of Contents
