Cleaning; Storage - Silvercrest SHM 300 C1 Operating Instructions Manual

2) Push the whisks 7 or the kneading hooks 8
into the slots 6 until they click audibly into
place and sit firmly.
3) Insert the mains plug 4 into a mains power
socket.
4) To start operating the appliance, move the
speed switch 2 to the desired speed setting.
You can select between 5 speed settings and
also use the Turbo button 3 (see section
"Speed levels").
5) Press the tool-release button 1 to release the
whisks 7 or the kneading hooks 8.
NOTE
For safety reasons, the whisks 7 and kneading
►
hooks 8 can only be released if the speed
switch 2 is set to the position "0".
│ GB │ MT
■ 42
Always insert the kneading
hook 8 or the whisk 7
without the ring into the
intended slot on the appli-
ance (labelled with an icon).
Always insert the kneading
hook 8 or the whisk 7
with the ring on the shaft
into the intended slot on the
appliance (labelled with an
icon).

Cleaning

DANGER!
RISK OF ELECTRICAL SHOCK!
Always remove the plug 4 from the power
►
socket before cleaning the appliance! There
is a risk of electric shock!
Never submerge the hand element 5 in
water or other liquids!
Clean the hand element 5 containing the motor
■
only with a damp cloth and, if necessary, with
a mild detergent.
The whisks 7 and the kneading hooks 8 can
■
be cleaned under running water or in warm
water with detergent. Dry all parts thoroughly
after cleaning.
We recommend cleaning the attachments
directly after use. This removes food residue and
reduces the risk of bacterial contamination.
NOTE
The whisks 7 and the kneading hooks
8 can also be cleaned in the dish-
washer.

Storage

■ Store the cleaned appliance in a clean, dust-free
and dry location.
SHM 300 C1