Download Print this page

Raider RD-SGC06 User Manual page 15

Spray gun with electric

Advertisement

5. Turn on the machine and spray the solvent or water into a container or a cloth.
6. Repeat the above procedure until the solvent or water emerging from the nozzle is clear.
7. Turn the machine off.
8. Then empty the container completely. Always keep the container seal free of coating material
residue and check for damage.
9. Clean the outside of the spray gun and container with a cloth soaked in solvent or water.
10. Unscrew the union nut and remove the air cap and nozzle. Clean the air cap and nozzle with
a brush and solvent or water.
Caution! Never clean nozzle or air holes in the spray gun with sharp metal objects.
Assembly.
Put the nozzle onto the gun body and find the correct position by turning it. The rib on the
nozzle should fit into the groove on the gun body. Put the air cap onto the nozzle and tighten
it using the union nut.
Maintenance.
Change the air filter if it is soiled.
WARNING! Never operate the machine without the air filter; dirt could be sucked in and
interfere with the function of the machine.
VI. Environmental protection.
Never place any electric tools in your household refuse.
To comply with European Directive 2002/96/EC concerning old electric and electronic
equipment and its implementation in national laws, old electric tools have to be separated
from other waste and disposed of in an environment-friendly fashion, e.g. by taking to a
recycling depot.
Recycling alternative to the demand to return electrical devices:
As an alternative to returning the electrical device, the owner is obliged to cooperate in ensuring
that the device is properly recycled if ownership is relinquished. This can also be done by
handing over the used device to a returns center, which will dispose of it in accordance with
national commercial and industrial waste management legislation. This does not apply to the
accessories and auxiliary equipment without any electrical components which are included
with the used device.
Layout.
1. Cover of the nozzle.
2. Nozzle.
3. Painting gun.
4. Trigger.
5. Air hose.
6. On/Off switch.
7. A container for paint.
15

Advertisement

loading

This manual is also suitable for:

074105