Trace:feed:control <Never|Next|Always; Trace:feed[:Selected] <Voltage|Current|Both - ITech IT-M3100 Programming Manual

Query command
TRACe:POINts?
Returns
NR1
TRACe:FEED:CONTrol <NEVer|NEXT|ALWays>
This command is used to select cache control. Select NEVer, Save to Cache is
disabled; select NEXT, save process starts and will stop when the cache is
filled in. Select ALWays. After cache is filled in, circulate the cache.
Syntax
TRACe:FEED:CONTrol <NEVer|NEXT|ALWays>
Arguments
<CPD> NEVer|NEXT|ALWays
Default value
NEVer
Example
TRAC:FEED:CONT NEXT
Query command
TRACe:FEED:CONTrol?
Returns
NEVer|NEXT|ALWays
TRACe:FEED[:SELected] <VOLTage|CURRent|BOTH>
This command selects the reading source saved in the cache. If VOLTage is
selected, the voltage reading is saved in cache; if CURRent is selected, the
current reading is saved in cache. If VOLTage and CURRent are
simultaneously selected, both voltage and current are saved in cache when
saving is executed.
Syntax
TRACe:FEED[:SELected] <VOLTage|CURRent|BOTH>
Arguments
<CPD> VOLTage|CURRent|BOTH
Copyright © Itech Electronic Co., Ltd.
Trace Commands
60