[Source:]Power:protection[:Level] <Nrf; [Source:]Power:protection:delay <Nrf - ITech IT-M3100 Programming Manual

[SOURce:]POWer:PROTection[:LEVel] <NRf+>
This command sets the over-power limit of the power supply.
Syntax
[SOURce:]POWer:PROTection[:LEVel] <NRf+>
Arguments
<NRf+> MIN TO MAX
Default value
MAX
Example
POW:PROT 860.0
Query command
[SOURce:]POWer:PROTection[:LEVel]? [MINimum|MAXimum]
Returns
NR3
[SOURce:]POWer:PROTection:DELay <NRf+>
This command sets the over-power delay time of the power supply.
Syntax
[SOURce:]POWer:PROTection:DELay <NRf+>
Arguments
<0.00-10.00>
Default value
10.00S
Example
POW:PROT:DEL 10.00
Query command
[SOURce:]POWer:PROTection:DELay? [MINimum|MAXimum]
Returns
NR3
Copyright © Itech Electronic Co., Ltd.
Source Commands
33