Using A U-Bracket With X-Utilt - L-Acoustics X12 Owner's Manual

Rigging procedures

Using a U-bracket with X-UTILT

type of deployment
rigging accessories
additional material
min number of operators
Additional safety for own arrays
When ying an enclosure or an array, use the M8 DIN580 threaded insert to implement a secondary safety.
Fasteners for wall-mounting
Secure the X-UTILT with two M10 screws.
Select screw length and anchors applicable to the wall properties.
The procedure is shown with X-UL12
The same procedure applies for X-US1215.
Assembly
Procedure
X-UTILT shall only be used vertically.
Fasteners for wall-mounting
Secure the X-UTILT with two M10 screws.
Select screw length and anchors applicable to the wall properties.
1. Secure X-UTILT to the wall using M10 screws.
50
wall-mounting
X-US1215 or X-UL12
X-UTILT
2 x M10 screws
electric screwdriver
1
X12 owner's manual (EN) version 1.0