Rigging procedures
Flying with a U-bracket
type of deployment
rigging accessories
additional material
min number of operators
Additional safety for own arrays
When ying an enclosure or an array, use the M8 DIN580 threaded insert to implement a secondary safety.
The procedure is shown with X-US1215.
The same procedure applies for X-UL12.
Assembly
Procedure
1. Drive the knobs in the inserts on the enclosure.
Stop when the threading is halfway in.
2. Place the U-bracket around the assembly.
Adjust the knobs on both sides so that the safety washer is between the hook and the enclosure.
56
ying
X-US1215 or X-UL12
truss clamp
1
X12 owner's manual (EN) version 1.0