Table of Contents
Advertisement
7.8
Lumbar support
This is a pad that offers extra support to the lumbar area.
To position the lumbar support, raise the backrest upholstery on its front side.
Using the Velcro fastener, attach the lumbar support either to the backrest upholstery or to the backrest bands at the required height.
Finally, return the backrest upholstery back to its normal position.
7.9
Headrest
This accessory is designed to support to head. It is suitable for folding wheelchairs; in fact, this type of headrest has a folding
structure.
When you unfold the wheelchair, the headrest unfolds, too.
To put the headrest in its operating position, pull it up until the two posts A are tilted downward, starting from the central block B.
Before folding the wheelchair, you should push the central block B down.
The occupant or the assistant can easily adjust the position of the headrest according to the occupant's need.
Unscrew the knob 1 to adjust the height.
Unscrew the knob 2 to adjust the depth.
Unscrew the knob 3 to adjust the pad by turning it up/down/right/left.
After each adjustment, screw the knob fast and make sure the system is stable.
Always check the adjustment; in fact, if the system is unstable, it may be cause risky situations.
After loosening each adjustment knob, you can also remove the corresponding parts.
B
A
A
1
3
Basic Light
2
35
Advertisement
Table of Contents
