Table of Contents
Advertisement
7.10
Lateral support
This accessory is designed support the occupant's torso.
This lateral support is of the "swing-away" type so it can be swung it back.
Turn the lever A by 90°and swing the lateral support to the opposite position where it will automatically lock.
Make sure the system is stable.
Always check the adjustment; in fact, if the system is unstable, it may pose a risk to the occupant.
7.11
Rear wheels
Depending on your functional and/or aesthetical needs, you can choose one of the 24" (1) or 22" (2) rear wheels available for this model.
Different types of hand rim can be fitted to these rear wheels.
Special wheels
(3) OFF-ROAD WHEELS*: these wheels provide superior smoothness and comfort on rough or unpaved terrain. They are supplied only with the off-road tyre and an aluminium hand rim.
(4) FAT WHEEL*: these wheels enable the wheelchair to be used on more difficult terrain. They are only supplied with their matching tyre and an aluminium hand rim.
1
.
*You can choose this type of wheel as an additional kit to the main rear wheels you choose for your wheelchair.
In this case, the wheels are interchangeable and, thus, you simply remove one pair and fit the other.
See also the chapter "Quick release rear wheels".
(5) 300 mm rear wheels
With these wheels, the wheelchair becomes shorter and narrower, but they are not as smooth as the 22" or 24" wheels.
With these wheels, occupants cannot push themselves.
The parking brake is fixed in the rear side of the wheelchair and it is designed to be used by the assistant.
2
3
4
L
L
5
Basic Light
36
Advertisement
Table of Contents
