Table of Contents
Advertisement
4
Safety Precautions
26
Please follow the following safety rules:
• Do not remove instrument covers when operating.
• Ensure that the instrument is switched off throughout the
cleaning procedures.
• Use of controls or adjustments or performance of procedures
other than those specified may result in hazardous radiation
exposure.
• Make sure that you disable all sources when you are cleaning
any optical interfaces.
• Under no circumstances look into the end of an optical
device attached to optical outputs when the device is
operational. The laser radiation is not visible to the human
eye, but it can seriously damage your eyesight.
• To prevent electrical shock, disconnect the instrument from
the mains before cleaning. Use a dry cloth, or one slightly
dampened with water, to clean the external case parts. Do
not attempt to clean internally.
• Do not install parts or perform any unauthorized
modification to optical devices.
• Refer servicing only to qualified and authorized personnel.
Agilent DFB Laser Source Module User's Guide
Advertisement
Table of Contents
