Which Cleaning Procedure Should I Use - Agilent Technologies Agilent 81663A User Manual

Which Cleaning Procedure should I use ?

Agilent DFB Laser Source Module User's Guide
Light dirt
If you just want to clean away light dirt, observe the following
procedure for all devices:
• Use compressed air to blow away large particles.
• Clean the device with a dry cotton swab.
• Use compressed air to blow away any remaining filament left
by the swab.
Heavy dirt
If the above procedure is not enough to clean your instrument,
follow one of the procedures below. Please consult "Cleaning
Instructions for this Instrument" on page 25 for the procedure relevant for
this instrument.
If you are unsure of how sensitive your device is to cleaning,
please contact the manufacturer or your sales distributor
4
35