Table of Contents
Advertisement
4
How to clean connector adapters
CAU T ION
38
Some adapters have an anti-reflection coating on the back to reduce
back reflection. This coating is extremely sensitive to solvents and
mechanical abrasion. Extra care is needed when cleaning these
adapters.
Preferred Procedure
Use the following procedure on most occasions.
Clean the adapter by rubbing a new, dry cotton swab over the
1
surface using a small circular movement.
Blow away any remaining lint with compressed air.
2
Procedure for Stubborn Dirt
Use this procedure when there is greasy dirt on the adapter:
Moisten a new cotton swab with isopropyl alcohol.
1
Clean the adapter by rubbing the cotton swab over the
2
surface using a small circular movement.
Take a new, dry soft tissue and remove the alcohol, dissolved
3
sediment and dust, by rubbing gently over the surface using a
small circular movement.
Blow away any remaining lint with compressed air.
4
Agilent DFB Laser Source Module User's Guide
Advertisement
Table of Contents
