Table of Contents
Advertisement
Power path status
The status code indicates which power path is affected:
codes
-
-
Status codes
If a fault occurs during operation, specific status codes may be displayed. Faults can result
from the following:
-
-
-
-
Battery fault:
If the battery signals a fault, the charger displays this fault as a battery fault including the
corresponding fault number for the battery. The respective fault is explained in the battery's
Operating Instructions.
If an error message appears on the display and if you cannot resolve the error yourself:
1
2
3
46
(1): Power path 1 - e.g. Statecode (542-1)
(2): Power path 2 - e.g. Statecode (542-2)
(1)
(2)
Battery fault
The voltage of the connected battery is unsuitable.
The device has overheated.
There is a software or hardware fault.
Note the displayed status code: e.g. "Statecode (31)".
Note the configuration of the device.
Contact your authorised service centre
Freely-defined text, which could for example include the contact details of the distrib-
utor, can be displayed if the device is in an error state.
Advertisement
Table of Contents
