Audio - Axis Q1798-LE User Manual

AXIS Q1798-LE Network Camera
Additional settings
6. Click OK.
Detect tampering with input signal
This example explains how to trigger an alarm when the input signal has been cut or short-circuited. For more information about the
I/O connector, see page 36.
1. Go to Settings > System > I/O Ports and turn on Supervised I/O for one of the ports.
Create an action rule:
1. Go to Settings > System > Events and create an action rule.
2. Type a name for the action rule.
3. From the list of triggers, select Input Signal and then Supervised input port. Set Tampered to Yes.
4. From the list of schedules, select Always.
5. From the list of actions, select Send Notification and then select a recipient or create a new recipient.
6. Click OK.
Send an email automatically if someone spray paints the lens
1. Go to Settings > System > Detectors.
2. Turn on Trigger on dark images. This will trigger an alarm if the lens is sprayed, covered, or rendered severely out of focus.
3. Set a duration for Trigger after. The value indicates the time that must pass before an email is sent.
Create an action rule:
1. Go to Settings > System > Events > Action rules and add an action rule.
2. Enter a name for the action rule.
3. From the list of triggers, select Detectors and then select Tampering.
4. From the list of actions, select Send Notification and then select a recipient from the list or click New Recipient
to create a new recipient.
5. Enter name and address for the email.
6. Click Ok.

Audio

Add audio to your recording
Turn on audio:
1. Go to Settings > Audio and turn on Allow audio.
2. Go to Input > Type and select your audio source.
Edit the stream profile which is used for the recording:
3. Go to Settings > Stream and click Stream profiles.
4. Select the stream profile and click Audio.
5. Select the checkbox and select Include.
22