Axis Q1798-LE User Manual page 10

AXIS Q1798-LE Network Camera
Additional settings
• Increase the light level in the scene.
• Mount the camera so that objects move toward it or away from it rather than sideways.
Maximize the details in an image
Important
If you maximize the details in an image, the bitrate will probably increase and you might get a reduced frame rate.
• Set the compression as low as possible.
• Select MJPEG streaming.
• Turn off Zipstream functionality.
Handle scenes with strong backlight
Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest
areas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range
(WDR) makes both dark and bright areas of the image visible.
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to Settings > Image > Wide dynamic range.
2. Turn on WDR.
3. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest.
Image without WDR.
Image with WDR.
10