Time Code; Control - Datavideo HDR-90 Instruction Manual

Time Code

Various time code options are described as follows:
 Rec Run：Time code runs during video recording.
 Free Run：Time code runs automatically.
 Embedded：Video embedded time code
 External：Linear (or Longitudinal) Timecode (LTC)

4.3.2 Control

1. Tap to open
Setting page
2. Genlock is
currently not
available.
5. Tap to
enable/disable
local control
Input
3. Tap to
enable/disable
DHCP mode
6. Tap to enable/disable
secure stop
Note: Once the secure stop is
enabled, you have to hold
down the Record button for 3
seconds to stop recording.
30
4. DVIP is currently
not available.
Timecode Trigger: Once
activated, the system will
automatically detect the
time code, and if detected,
the HDR unit will then start
recording.