Datavideo HDR-90 Instruction Manual page 14

5. Switch ON the unit.
6. New drives will be formatted within the recorder upon first use. The status will displayed
on the touch screen and will prompt the user as soon as the recorder becomes available for
setup and use.
2. As shown in the diagram on the left, place
an SSD in the drive enclosure then re-secure
the top plate of the drive enclosure using the
four screws removed earlier.
3. Completion of disk drive enclosure
assembly.
4. Push the drive enclosure into recorder as
shown. Now move the locking latch from
bottom to the top to secure the drive
enclosure in place.
14